学习经历：
1984年毕业于湖南大学（学士），1987年毕业于天津大学（硕士），1995年在中国建筑材料科学研究院获得博士学位。
工作经历：
1987年至1996年在中国建筑材料科学研究院从事特种陶瓷的研究与开发工作。1996年至2005年在日本产业技术综合研究所（AIST九州中心和中部中心）从事先进陶瓷的研究与开发工作。2005年获中科院“百人计划”基金资助回中国科学院上海硅酸盐研究所工作。现任高性能陶瓷和超微结构国家重点实验室副主任，先进非氧化物陶瓷课题组组长，研究员，博士生导师。
长期从事非氧化物陶瓷（TiN、Ti(C,N)、TiB2、BN、B4C、ZrB2、Si3N4、SiC、AlN、HfB2、HfC、MoSi2等）的制备科学与力学性能表征，多孔陶瓷的制备与性能表征，层状陶瓷的设计制备与模型，陶瓷材料的反应合成以及金属和玻璃熔体对陶瓷材料的润湿与腐蚀行为等研究。至今已发表SCI论文150余篇，他人引用1000余次，申请专利20余项。
研究方向：
1.超高温陶瓷
Ultra-High TemperatureCeramics (UHTCs)
2.超高温陶瓷纤维及复合材料
Ultra-High TemperatureCeramic Fibers and Composites
3.高导热无机/有机复合材料
High Thermal ConductiveCeramic/Organic Polymer Composites
4.第四代先进核能系统(Gen IV)用陶瓷材料
Inert Matrix Fuels (IMF)for Gen IV Nuclear Systems
5.多层次及形貌可控高性能陶瓷粉体的合成与表面改性
Synthesis and SurfaceModification of High Performance Ceramic Powders with Controllable ParticleSize and Morphology
6.织构化先进非氧化物陶瓷材料
Textured AdvancedNon-Oxide Ceramics
7.氮化硼与碳化硼陶瓷
Boron Nitride and BoronCarbide Ceramics
8.高温熔体对陶瓷材料的润湿与腐蚀行为
High Temperature WettingBehavior of Ceramics with Molten Glass and Metals
代表性论文：
1. G. J. Zhang, Z. Z. Jinand X. M. Yue, “TiN-TiB2 Composites Prepared by Reactive Hot Pressing andEffects of Ni Addition,” J. Am. Ceram. Soc., 78 [10] 2831-2833 (1995).
2. G. J. Zhang, X. M. Yue,Z. Z. Jin and J. Y. Dai, “In-Situ Synthesized TiB2 Toughened SiC,” J. Eur.Ceram. Soc., 16, 409-412 (1996).
3. G. J. Zhang, X. M. Yueand Z. Z. Jin, “Preparation and Microstructure of TiB2-TiC-SiCPlatelet-Reinforced Ceramics by Reactive Hot-Pressing,” J. Eur. Ceram. Soc.,16, 1145-1148 (1996).
4. G. J. Zhang, X. M. Yueand T. Watanabe, “High-Temperature Multilayer Composites with SuperplasticInterlayers,” J. Am. Ceram. Soc., 82 [11] 3257-3259 (1999).
5. G. J. Zhang and T.Ohji, “Effect of BN Content on Elastic Modulus and Bending Strength of SiC-BNIn Situ Composites,” J. Mater. Res., 15 [9] 1876-1880 (2000).
6. G. J. Zhang, Z. Y.Deng, N. Kondo, J. F. Yang and T. Ohji, “Reactive Hot Pressing of ZrB2-SiCComposites,” J. Am. Ceram. Soc., 83 [9] 2330-2332 (2000).
7. G. J. Zhang, X. M. Yueand T. Watanabe, “In situ synthesis of Mo(Si,Al)2-SiC Composites,” J. Mater.Sci., 35 [18] 4729-4733 (2000).
8. G. J. Zhang, Y. Beppu,T. Ohji and S. Kanzaki, “Reaction Mechanism and Microstructure Development ofStrain Tolerant In Situ SiC-BN Composites,” Acta Mater., 49 [1] 77-82(2001).
9. G. J. Zhang, J. F. Yangand T. Ohji, “Fabrication of Porous Ceramics with Unidirectionally AlignedContinuous Pores,” J. Am. Ceram. Soc., 84 [6] 1395-1397 (2001).
10. G. J. Zhang and T.Ohji, “In Situ Reaction Synthesis of SiC-BN Composites,” J. Am. Ceram. Soc., 84[7] 1475-1479 (2001).
11. G. J. Zhang, J. F.Yang, M. Ando and T. Ohji, “Reaction Synthesis of Aluminum Nitride-BoronNitride Composites Based on the Nitridation of Aluminum Boride,” J. Am. Ceram.Soc., 85 [12] 2938-2944 (2002).
12. G. J. Zhang, M. Ando,J. F. Yang, T. Ohji and S. Kanzaki, “Boron Carbide and Nitride as Reactants forIn Situ Synthesis of Boride-Containing Ceramic Composites,” J. Eur. Ceram.Soc., 24 [2] 171-178 (2004).
13. G. J. Zhang, J. F.Yang, M. Ando and T. Ohji, “Reactive Hot Pressing of Alumina-Silicon CarbideNanocomposites,” J. Am. Ceram. Soc., 87 [2] 299-301 (2004).
14. G. J. Zhang, J. F.Yang, M. Ando, T. Ohji and S. Kanzaki, “Mullite-Boron Nitride Composite withHigh Strength and Low Elasticity,” J. Am. Ceram. Soc., 87 [2] 296-298(2004).
15. G. J. Zhang, J. F.Yang, M. Ando, T. Ohji and S. Kanzaki, “Reactive Synthesis of Alumina-BoronNitride Composites,” Acta Mater., 52 [7] 1823-1835 (2004).
16. G. J. Zhang, M. Ando,T. Ohji and S. Kanzaki, “High-Performance Boron Nitride-Containing Compositesby Reaction Synthesis for the Applications in the Steel Industry,” Int. J.Appl. Ceram. Technol., 2 [2] 162u2013171 (2005).
